| |
| The complete
electric underfloor
heating solution
for all laminate &
timber floors. |
Easy To Lay
EcofilmSet, is supplied in 3
different widths (300mm,
500mm and 1000mm) &
standard lengths between
2m & 10m in 0.5m
increments. Just select the
roll width and nearest
lengths to provide maximum
floor coverage. Installation
is completely dry & is a
simple unrolling process. |
Quick Installation
EcofilmSet comes pre-wired.
Only a simple 2 wire
electrical mains connection is
required to provide gentle
and safe heating comfort.
EcofilmSet is rated at
130W/m2. However, power
ratings of 100W/m2 &
160W/m2 are available on
special order. |
Freedom Of Installation
EcofilmSet elements are ultrathin
and have a minimum
effect on finished floor levels;
an important consideration
when laying floating floors.
It can be laid on most subfloors;
concrete or timber
when used in conjunction
with
Ecomax-Lite Thermal
Insulation. |
Guarantee
EcofilmSet comes with a
10 year guarantee against
manufacturing defects. |
|
|
 |
Electrical Requirements
EcofilmSet Underfloor
Heating Elements are very
simple to install by following
the comprehensive instruction
booklet included with each
element kit. |
 |
The final electrical
connections should be
made by a qualified
electrician in accordance
with the current wiring
regulations. |
|
All installations require
a 30mA RCD (residual
current device) for safe
operation. |
|
All elements require
connection to the
thermostat via a standard
junction box. |
|
EcofilmSet is approved to
the relevant International
standard approval
EN60335-2-96. |
|
| |
|
Floor Construction
Before laying the EcofilmSet
on either a suspended
wooden floor or concrete
sub-floor it is necessary to
install a layer of Ecomax-Lite Thermal Insulation.
This will
minimise heat losses and
ensure quicker heat-up times
for the floor. It will also act
as a means of sound
deadening which is required
for laminate floors.
Next roll
out the pre-cut lengths of
EcofilmSet taking care to
locate the “cold tails” on the
wall nearest the thermostat
connection box. Trim to
length as required and
insulate trimmed ends as per
instructions before taping the
element into position. Never
overlap the heating surfaces.
Cover the total EcofilmSet
installation with a layer of
Flexel Polyester Vapour
Barrier (PVB25) before laying the chosen floor covering. |
 |
| |
| Product Codes |
300mm
Reference |
300mm
Reference |
Output
(W) |
ES13-320
ES13-325
ES13-330
ES13-335
ES13-340
ES13-345
ES13-350
ES13-355
ES13-360
ES13-365
ES13-370
ES13-375
ES13-380
ES13-385
ES13-390
ES13-395
ES13-3100 |
2.00
2.50
3.00
3.50
4.00
4.50
5.00
5.50
6.00
6.50
7.00
7.50
8.00
8.50
9.00
9.50
10.00 |
70
88
105
123
140
158
176
193
211
228
246
263
281
298
316
333
351 |
|
500mm
Reference |
300mm
Reference |
Output
(W) |
ES13-520
ES13-525
ES13-530
ES13-535
ES13-540
ES13-545
ES13-550
ES13-555
ES13-560
ES13-565
ES13-570
ES13-575
ES13-580
ES13-585
ES13-590
ES13-595
ES13-5100 |
2.00
2.50
3.00
3.50
4.00
4.50
5.00
5.50
6.00
6.50
7.00
7.50
8.00
8.50
9.00
9.50
10.00 |
122
153
183
214
244
275
306
336
367
397
428
458
489
519
550
580
611 |
|
300mm
Reference |
300mm
Reference |
Output
(W) |
ES13-1020
ES13-1025
ES13-1030
ES13-1035
ES13-1040
ES13-1045
ES13-1050
ES13-1055
ES13-1060
ES13-1065
ES13-1070
ES13-1075
ES13-1080
ES13-1085
ES13-1090
ES13-1095
ES13-10100 |
2.00
2.50
3.00
3.50
4.00
4.50
5.00
5.50
6.00
6.50
7.00
7.50
8.00
8.50
9.00
9.50
10.00 |
252
315
378
441
504
567
631
694
757
820
883
946
1009
1072
1135
1198
1261 |
|
| Accessories |
Product
Code |
Description |
PVB25
ADT50 |
Polyester Vapour Barrier (1m x 25m roll)
Heavy duty adhesive tape (50mm x 50m roll) |
|
| |
