|
|
|
The complete
electric underfloor
heating solution
for carpet and
vinyl floors.
Traditional methods of
installing electric underfloor
heating in rooms with carpet
or vinyl floor coverings,
consisted of utilising cable
systems covered with
difficult to use and time
consuming liquid levelling
compounds. These tend to
be messy & extend the
installation time & costs
because of drying/curing
times.
There is now a dry lay
alternative to this system that
is both quick, clean and
simple.
|
|
| Ecomax-Duo is a dual board
overlay system suitable for
use over EcofilmSet underfloor heating. It is a
dry lay system that creates
a free floating sub-floor that
is extremely stable and is
instantly ready to receive the
finished floor covering. |
| Ecomax-Duo provides a
smooth stable laying surface
to which most finished floor
coverings can be fixed. This
enables EcofilmSet elements
to be used as the underfloor
heat source for a variety
of floor coverings such as
carpet, linoleum and
luxury vinyl. |
| |
|
 |
Installation
Installation of Ecomax-Duo is
quick, clean and simple. The
system consists of a baseboard
and a top board, each with a
layer of adhesive. To install,
place both boards with the
facing adhesive layers on top of
each other. The joint edges of
each layer should be staggered
(see diagram). Both adhesive
surfaces interact to bond the
boards together to provide a
stable laying surface. Boards can
be easily worked with and cut.
Full inter-board adhesion is
obtained by tapping with a
rubber mallet once a satisfactory
layout pattern has been
achieved.
The combination of EcofilmSet
and Ecomax-Duo provides a
labour saving, cost effective
method for heating Linoleum,
Vinyl and Carpet. Completely
dry-fit, the heating system and
floor can be laid in one
continuous process. |
|
No mess and no drying time
delay means jobs can
be
completed quicker and easier.
Carpet, Vinyl & Linoleum can be
laid directly on the surface of
EcoLay as the thermal insulation
material (Ecomax-Lite) used
below the EcofilmSet heating
system provides cushioning from
step impact.
Carpets with a low tog rating
should be used. The greater the
tog rating the slower the heating
sytem will react. If you need to
use an additional underlay ensure
that it also has a low tog rating.
For fixing it is recommended to
use the double-stick method of
carpet installation as this will
allow better
heat transfer.
|
| Ecomax-Duo Useful Information |
| Dimensions |
600mm x 1200mm |
| Thickness |
7mm |
| Coverage per pack |
2.88m (4 base boards
& 4 top boards) |
| Material |
MDF fitted with
interactive adhesive |
| Density |
770Kg/m |
| Fire Class |
B2 |
| Thermal Resistance |
0.07mK/W |
|
Product Codes
|
|
|
Product
Code |
Thickness
(mm) |
Dimensions
(mm) |
Pack
Contents |
| DUO 7 |
7mm |
600 x 1200 |
4 base boards &
4 top boards (2.88m) |
|
| Note: This section is for Ecomax-Duo, EcofilmSet Heating Element product lists
can be found here |
