| |
| The complete
electric underfloor
heating solution for
new build -
Suspended Timber
Floors. |
| Ecofilm Warm Floor System is
a unique system that is installed
under the floor, between the
timber joists to provide either
primary heat or supplementary
heat in new build projects. To
achieve the best results,
insulation must be installed
below the heating element. |
| The result is a warm, dry floor
which is maintenance free. |
Quick Installation
Ecofilm Heating element for
this type of wooden floor
application should have a
maximum heating effect of
90W/m . The maximum
floor temperature should be controlled by an |
|
|
| effective
floor temperature sensor to
a temperature recommended
by the flooring manufacturer,
usually 27 C. Particle
chipboard flooring is
recommended for installation
over Ecofilm elements. Care
should be taken when Pine
T&G boarding flooring is
used as some stability
problems may occur. |
| Ecofilm is available in 3
widths; 300, 400 and
600mm to match joist
centres. The product is
perforated along the 50mm
clear selvage edge. This
allows the border to be bent
to a right angle (90 deg) to
allow attachment to the joist
when installing, Maintain a
40mm space between the
perforation and the top edge
of the joist. The element
should be attached with
staples to the wooden joists. |
|
